PSY610 PAST PAPERS

JOIN OUR SOCIAL MEDIA GROUPS

FACEBOOK GROUP:     JOIN CLICK HERE
FACEBOOK PAGE:     JOIN CLICK HERE
WHATSAPP GROUP 1:  JOIN CLICK HERE
WHATSAPP GROUP 2:  JOIN CLICK HERE
TELEGRAM GROUP:      JOIN CLICK HERE

PSY610 PAST PAPERS

PSY610 PAST PAPERS

 

See also:

CS201 FINAL TERM SOLVED PAPERS BY WAQAR SIDHU.ENG101 FINAL TERM SOLVED MCQS.CS403 CURRENT FINAL TERM PAPERS.CS101 FINAL TERM SOLVED PAPERS BY MOAAZ MEGA FILE. CS201 FINAL TERM SOLVED PAPERS BY MOAAZ MEGA FILE. CS205 FINAL TERM PAST PAPERS. CS204 FINAL TERM PAST PAPERS. CS301 FINAL TERM SOLVED PAPERS BY MOAAZ. CS304 FINAL TERM SOLVED PAPERS BY MOAAZ. CS311 FINAL TERM SOLVED PAPERS BY MOAAZ. CS401 FINAL TERM SOLVED PAPERS BY MOAAZ

 

Tug boat or giant squid attack.
Fibers can be joined in three ways. First, they can stop the connectors and insert them into the fiber
socket. The connectors lose about 10 to 20 percent of the light, but make the adjustment system easier.

Second, they can be mechanically separated. Mechanical compound Cut the two ends next to each other carefully
Others have a special sleeve and tighten them in place. Alignment can be improved by sending light
junction and then minor adjustments to amplify the signal. Machine divisions employ skilled personnel
About 5 minutes and causes a mild loss of 10 percent.

Third, two pieces of fiber can be joined (melted) to form a solid bond. Fusion is as good as Spice A
Single drawn fiber, but even here, there is a small amount of shrinkage.
For all three types of cracks, reflection can occur at the fission point, and the reflected energy is possible
interfere with the signal.

Two types of light sources are commonly used for signalling, LEDs (light emitting diodes) and
semiconductor laser. They have different characteristics as shown. They can be tuned for wavelength
Installing a Fabry-Frode or Mac-Gehender interferometer between the source and the fiber. fabri-berot

YOUR FILE WILL BE READY IN 60 SECONDS

Papers available on link above